Chevrolet 2007 Corvette Spécifications Page 179

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 486
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 178
Manual Operation
Driver Power/Temperature: Press the driver
temperature knob on the driver side of the climate
control panel to turn the climate control system
off. This is the only setting that completely shuts off
the fan. The digital display will show only the
outside temperature. You can still adjust the driver
and the passenger set temperature and the air
intake mode when the climate control is off.
Passenger Power/Temperature: Press the
passenger temperature knob on the passenger
side of the climate control panel to turn the
passenger’s climate control system on or off. Turn
the knob to increase or decrease the temperature
for the passenger. If the passenger’s climate
control system is off, the driver’s temperature knob
will control the temperature for the entire vehicle.
N (MODE): Press this button to manually
lock in the current air delivery setting and to stop
the automatic mode control. Pressing the
MODE button will delete AUTO from the digital
display and the mode graphics will be shown.
To change the setting, press the MODE button
again. The AUTO button must be pressed to return
to the automatic mode selection.
To change the current mode, select one of the
following:
H (Vent): This mode directs most of the air to
the instrument panel outlets, with a very small
amount of air directed to the floor outlets.
% (Bi-Level): This mode directs about half of
the air to the instrument panel outlets, and directs
the remaining air to the floor outlets. Cooler air
is directed to the upper outlets and warmer air to
the floor outlets.
6(Floor): This mode directs most of the air to
the floor outlets with some air directed to the
side window defogger outlets and some air
directed toward the windshield.
The MODE button can also be used to select the
defog mode. Information on defogging and
defrosting can be found later in this section.
x9w(Fan): Press the button with the fan
symbol to manually increase or decrease the
fan speed. Keep pressing the up or down arrow
on this switch until the desired fan speed appears
on the display.
179
Vue de la page 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 485 486

Commentaires sur ces manuels

Pas de commentaire