Chevrolet 2007 Corvette Spécifications télécharger pdf (Page 357)

4. With the coolant surge tank pressure cap off,

start the engine and let it run until you can

feel the upper radiator hose getting hot. Watch

out for the engine cooling fan.

By this time, the coolant level inside the

coolant surge tank may be lower. If the level is

lower, add more of the proper mixture to the

coolant surge tank until the level stabilizes

at the FULL COLD mark on the coolant

surge tank.

5. Then replace the pressure cap. Be sure the

pressure cap is hand-tight and fully seated.

Check the level in the surge tank when

the system has cooled down. If the coolant is

not at the proper level, repeat Steps 1

through 4, then reinstall the pressure cap. If

the coolant is not at the proper level when the

system cools down again, see your dealer.

Power Steering Fluid

See Engine

Compartment Overview

on page 328 for

reservoir location.

357

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 485 486

Commentaires sur ces manuels

Pas de commentaire