2. Once the oil has been drained from the
engine, remove the engine oil filter and
allow the oil to drain.
3. Re-install both drain plugs and tighten them to
18 lb ft (25
Y).
4. Replace the oil filter and tighten it to 18 lb ft
(25
Y). See Normal Maintenance
Replacement Parts on page 445 for the
correct filter.
5. Oil is filled through the opening in the top of
the external engine oil tank. Remove the oil
fill cap.
6. Add eight quarts (7.6 L) of oil to the oil tank.
See Capacities and Specifications on
page 427.
7. Install the oil fill cap and insert the dipstick, if
removed.
8. Start the engine and let it run at idle for at
least 15 seconds. This will circulate the
fresh engine oil through the lubrication system.
9. Shut off the engine and check the oil level as
described under “Checking Engine Oil
(Z06 Only).”
337
Commentaires sur ces manuels