Chevrolet 2007 Corvette Spécifications télécharger pdf (Page 11)

To program each button, use the following steps:

1. Adjust the settings for the driver’s seat

position, both outside mirrors, and the

telescopic steering column position to a

comfortable driving position.

2. Press and hold button 1 until two beeps are

heard, then release the button.

Your settings are now programmed.

A second seating, mirror, and telescopic steering

column position can be programmed by repeating

the above steps and pressing button 2 for driver 2.

To recall a memory position, do one of the

following:

• If you have an automatic transmission vehicle,

press and release the desired button 1 or 2

while the vehicle is in PARK (P).

A single beep will sound and the memory

position will be recalled after a brief delay.

If the vehicle is not in PARK (P), three beeps

will sound and the memory position will

not be recalled.

• If you have a manual transmission vehicle,

press and release the desired button 1 or 2.

If the vehicle is on, the parking brake needs to

be set to recall the memory position.

A single beep will sound and the memory

position will be recalled after a brief delay.

If the vehicle is on and the parking brake is not

set, three beeps will sound and the memory

position will not be recalled.

If your vehicle has the Auto Memory Recall

feature and it is turned on in the Driver Information

Center (DIC), the seat, mirrors, and telescopic

steering column position will automatically adjust

to their programmed positions when the engine

is started. See “Auto Memory Recall” under

DIC Vehicle Personalization on page 232 for more

information.

To stop recall movement of the memory feature at

any time, press one of the power seat controls,

power mirror control buttons, memory buttons, or

the telescopic steering column switch.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 485 486

Commentaires sur ces manuels

Pas de commentaire