Chevrolet 2007 Corvette Spécifications télécharger pdf (Page 361)

Checking Brake Fluid

You can check the brake ﬂuid without taking off

the cap. Look at the brake ﬂuid reservoir. The ﬂuid

level should be above the MIN mark on the

reservoir. If it is not, have your brake system

checked to see if there is a leak.

After work is done on the brake hydraulic system,

make sure the level is between the MIN and

MAX marks.

What to Add

When you do need brake ﬂuid, use only DOT-3

brake ﬂuid. Refer to Recommended Fluids

and Lubricants on page 443. Use new brake ﬂuid

from a sealed container only.

Always clean the brake ﬂuid reservoir cap and the

area around the cap before removing it. This

will help keep dirt from entering the reservoir.

{CAUTION:

With the wrong kind of ﬂuid in the brake

system, the brakes may not work well, or

they may not even work at all. This could

cause a crash. Always use the proper

brake ﬂuid.

Notice:

• Using the wrong ﬂuid can badly damage

brake system parts. For example, just a

few drops of mineral-based oil, such

as engine oil, in the brake system can

damage brake system parts so badly that

they will have to be replaced. Do not

let someone put in the wrong kind of ﬂuid.

• If you spill brake ﬂuid on your vehicle’s

painted surfaces, the paint ﬁnish can

be damaged. Be careful not to spill brake

ﬂuid on your vehicle. If you do, wash it

off immediately. See Washing Your Vehicle

on page 411.

361

1 2 ... 356 357 358 359 360 361 362 363 364 365 366 ... 485 486

Commentaires sur ces manuels

Pas de commentaire