Chevrolet Silverado 2006 Spécifications télécharger pdf (Page 514)

4. Insert the hoist end (F)

through the hole (G) in

the rear bumper and

into the hoist shaft.

5. Raise the tire part way upward. Make sure the

retainer is seated in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise

until you hear two clicks or feel it skip twice. You

cannot overtighten the cable.

7. Make sure the tire is stored securely. Push, pull (A),

and then try to turn (B) the tire. If the tire moves,

use the wheel wrench to tighten the cable.

8. Reinstall the spare tire lock (if equipped).

Pas de commentaire

Chevrolet Silverado 2006 Spécifications Page 514