Chevrolet Silverado 2006 Spécifications télécharger pdf (Page 135)

100

101

AUTO 4WD (Automatic Four-Wheel Drive): This

setting is ideal for use when road surface traction

conditions are variable. When driving your vehicle in

Automatic Four-Wheel Drive, the front axle is engaged,

but the vehicle’s power is sent to the rear wheels.

When the vehicle detects a loss of traction, the system

will automatically engage four-wheel drive. Driving in

this mode results in slightly lower fuel economy

than Two-Wheel High.

m (Two-Wheel High): This setting is used for

driving in most street and highway situations. Your front

axle is not engaged in two-wheel drive. This setting

also provides the best fuel economy.

{CAUTION:

Shifting the transfer case to NEUTRAL can

cause your vehicle to roll even if the

transmission is in PARK (P). You or someone

else could be seriously injured. Be sure to set

the parking brake before placing the transfer

case in NEUTRAL. See Parking Brake on

page 2-49.

N (NEUTRAL): Shift the vehicle’s transfer case to N

(NEUTRAL) only when towing your vehicle. See

Recreational Vehicle Towing on page 4-62 or Towing

Your Vehicle on page 4-61 for more information.

m (Four-Wheel High): Use this setting when you

need extra traction, such a on snowy or icy roads or in

most off-road situations. This setting also engages

your front axle to help drive your vehicle. This is the best

setting to use when plowing snow.

n (Four-Wheel Low): This setting also engages

your front axle and delivers extra torque. You may never

need Four-Wheel Low. It sends maximum power to all

four wheels. You might choose Four-Wheel Low if you

are driving off-road in deep sand, deep mud, deep snow,

and while climbing or descending steep hills. When

operating in Four-Wheel Low, the gear ratio provides

additional torque when compared to four-wheel high. The

transmission gear shift feel will be exaggerated.

Indicator lights in the switches show which setting your

transfer case is in. The indicator lights will come on

brieﬂy when you turn on the ignition and one will stay on.

If the lights do not come on, you should take your

vehicle to your dealer for service. An indicator light will

ﬂash while the transfer case is being shifted. It will

stay on when the shift is complete. If for some reason

the transfer case cannot make a requested shift, it

will return to the last chosen setting.

If the SERVICE 4WD message stays on, you should

take your vehicle to your dealer for service. See

DIC Warnings and Messages on page 3-54 for further

information.

2-41

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 585 586

Commentaires sur ces manuels

Pas de commentaire

Chevrolet Silverado 2006 Spécifications Page 135

Commentaires sur ces manuels

Produits connexes et manuels pour Alarme de voiture Chevrolet Silverado 2006