Chevrolet Silverado 2006 Spécifications télécharger pdf (Page 457)

100

101

7. Connect the red

positive (+) cable to the

positive (+) terminal

of the vehicle with the

dead battery. Use

a remote positive (+)

terminal if the

vehicle has one.

8. Do not let the other end touch metal. Connect it to

the positive (+) terminal of the good battery. Use a

remote positive (+) terminal if the vehicle has one.

9. Now connect the black negative (−) cable to the

negative (−) terminal of the good battery. Use a

remote negative (−) terminal if the vehicle has one.

The vehicle’s remote negative (–) terminal is

marked GND.

10. Do not let the other end touch anything until the

next step. The other end of the negative (−) cable

does not go to the dead battery. It goes to a heavy

unpainted metal engine part of the vehicle with

the dead battery, or to a remote negative (–)

terminal if the vehicle has one.

11. Connect the other end

of the negative (−)

cable to the remote

negative (−) terminal,

marked GND, on

the vehicle with the

dead battery. See

Engine Compartment

Overview on page 5-14

for the location of

your vehicle’s remote

negative (−) terminal.

12. Now start the vehicle with the good battery and run

the engine for a while.

13. Try to start the vehicle that had the dead battery. If

it will not start after a few tries, it probably needs

service.

V8 engine shown, other

engines similar

5-55

1 2 ... 452 453 454 455 456 457 458 459 460 461 462 ... 585 586

Commentaires sur ces manuels

Pas de commentaire

Chevrolet Silverado 2006 Spécifications Page 457

Commentaires sur ces manuels

Produits connexes et manuels pour Alarme de voiture Chevrolet Silverado 2006