Chevrolet 2012 Traverse Manuel d'utilisateur télécharger pdf (Page 377)

Black plate (77,1)

Chevrolet Traverse Owner Manual - 2012

Vehicle Care 10-77

6. Connect the red positive (+)

cable to the positive (+) terminal

of the dead battery.

Use a remote positive (+)

terminal if the vehicle has one.

7. Do not let the other end touch

metal. Connect it to the

positive (+) terminal of the

good battery. Use a remote

positive (+) terminal if the vehicle

has one.

8. Now connect the black

negative (−) cable to the

negative (−) terminal of the

good battery. Use a remote

negative (−) terminal if the

vehicle has one.

Do not let the other end touch

anything until the next step. The

other end of the negative (−)

cable does not go to the dead

battery. It goes to a heavy,

unpainted metal engine part,

or to a remote negative (−)

terminal on the vehicle with the

dead battery.

9. Connect the other end of the

negative (−) cable at least

18 inches (45 cm) away from

the dead battery, but not near

engine parts that move.

The electrical connection is just

as good there, and the chance

of sparks getting back to the

battery is much less.

Your vehicle has a remote

negative (−) terminal for this

purpose.

10. Now start the vehicle with the

good battery and run the

engine for a while.

1 2 ... 372 373 374 375 376 377 378 379 380 381 382 ... 449 450

Commentaires sur ces manuels

Pas de commentaire