Chevrolet 2012 Traverse Manuel d'utilisateur télécharger pdf (Page 369)

Black plate (69,1)

Chevrolet Traverse Owner Manual - 2012

Vehicle Care 10-69

{

WARNING

Rust or dirt on a wheel, or on the

parts to which it is fastened, can

make wheel nuts become loose

after time. The wheel could come

off and cause an accident. When

changing a wheel, remove any

rust or dirt from places where the

wheel attaches to the vehicle. In

an emergency, a cloth or a paper

towel can be used; however, use

a scraper or wire brush later to

remove all rust or dirt.

{

WARNING

Never use oil or grease on bolts

or nuts because the nuts might

come loose. The vehicle's wheel

could fall off, causing a crash.

10. Remove any rust or dirt from

the wheel bolts, mounting

surfaces, and spare wheel.

11. Place the spare tire on the

wheel mounting surface.

12. Put the nuts on by hand by

turning them clockwise until the

wheel is held against the

mounting surface. Make sure

the rounded end is toward the

wheel.

13. Lower the vehicle by attaching

the wrench to the jack

and turning the wrench

counterclockwise. Lower the

jack completely.

{

WARNING

Wheel nuts that are improperly or

incorrectly tightened can cause

the wheels to become loose or

come off. The wheel nuts should

be tightened with a torque wrench

to the proper torque specification

after replacing. Follow the torque

specification supplied by the

aftermarket manufacturer when

using accessory locking wheel

nuts. See Capacities and

Specifications on page 12‑2 for

original equipment wheel nut

torque specifications.

1 2 ... 364 365 366 367 368 369 370 371 372 373 374 ... 449 450

Commentaires sur ces manuels

Pas de commentaire