Chevrolet 2012 Corvette Manuel d'utilisateur télécharger pdf (Page 178)

Black plate (64,1)

Chevrolet Corvette Owner Manual - 2012

5-64 Instruments and Controls

2. From inside the vehicle,

press the two outside buttons

at the same time for one to

two seconds, and immediately

release them.

3. Locate in the garage,

the garage door opener

receiver (motor-head unit).

Locate the “Learn” or “Smart”

button. It can usually be found

where the hanging antenna wire

is attached to the motor-head

unit and may be a colored

button. Press this button. After

pressing this button, complete

the following steps in less than

30 seconds.

4. Immediately return to the

vehicle. Press and hold the

Universal Home Remote button

that will be used to control the

garage door until the garage

door moves. The indicator light,

above the selected button,

should slowly blink. This button

may need to be held for up to

20 seconds.

5. Immediately, within one second,

release the button when the

garage door moves. The

indicator light blinks rapidly until

programming is complete.

6. Press and release the same

button again. The garage door

should move, confirming that

programming is successful and

complete.

To program another Rolling Code

device such as an additional garage

door opener, a security device,

or home automation device, repeat

Steps 1 through 6, choosing a

different function button in Step 4

than what was used for the garage

door opener.

If these instructions do not work,

the garage door opener is probably

a Fixed Code unit. Follow the

programming instructions that follow

for a Fixed Code garage door

opener.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 431 432

Commentaires sur ces manuels

Pas de commentaire