Chevrolet 2006 Colorado Spécifications télécharger pdf (Page 97)

100

101

Removing the Tailgate

Follow these steps if you want to remove the tailgate:

1. With the tailgate fully open, lift up slightly on

the entire tailgate assembly.

Remove the retaining

cables from both sides of

the tailgate by pulling

the clips away from the bolt

heads while pushing the

cable bracket forward.

When the larger part of the

hole on the bracket is

over the bolt, slide

the bracket off of the bolt.

2. With the tailgate partially down, lift up on the

passenger’s side and pull the tailgate toward

you, then move the tailgate to the right to release

the driver’s side. You can then remove the

entire tailgate assembly.

Reverse the procedure to reinstall the tailgate.

Make sure it is secure.

To partially lower the tailgate do the following:

1. With the tailgate fully open, lift up slightly on the

entire tailgate assembly.

2. Remove the retaining

cable from the

passenger side of

the tailgate by pulling

the clip away from the

bolt head while pushing

the cable bracket

forward. When the

larger part of the hole

on the bracket is over

the bolt, slide the

bracket off of the bolt.

3. Slide the lower end ﬁtting onto the top bolt.

The tailgate will now stay in the partially opened

position.

4. Repeat steps 2 and 3 for the driver side.

If you would like to close the tailgate, the bracket

cannot be in the partially opened position and must be

anchored on the bottom bolt, using the top position

on the bracket.

Tailgate Partially Down

2-11

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 429 430

Commentaires sur ces manuels

Pas de commentaire

Chevrolet 2006 Colorado Spécifications Page 97

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Chevrolet 2006 Colorado