Chevrolet 2006 Colorado Spécifications télécharger pdf (Page 138)

100

101

Turn and Lane-Change Signals

The turn signal has two upward (for right) and

two downward (for left) positions. These positions

allow you to signal a turn or a lane change.

To signal a turn, move the lever all the way up or down.

When the turn is ﬁnished, the lever will automatically

return to the off position.

To signal a lane change, raise or lower the lever until

the arrow starts to ﬂash. Hold it there until the change is

completed. The lever will return by itself when released.

An arrow on the instrument

panel cluster will ﬂash in

the direction of the

turn or lane change.

As you signal a turn or a lane change, if the arrows

ﬂash more quickly than normal, a signal bulb may

be burned out and other drivers will not see your

vehicle’s turn signal.

If a bulb is burned out, replace it to help avoid an

accident. If the arrows do not go on at all when signaling

a turn, check for a burned-out bulb or a blown fuse.

For bulb replacement, see Taillamps, Turn Signal,

Stoplamps and Back-up Lamps on page 5-49. For a

blown fuse or circuit breaker, see Fuses and Circuit

Breakers on page 5-100

Turn Signal On Chime

If a turn signal is left on for more than 3/4 of a mile

(1.2 km), a chime will sound at each ﬂash of the turn

signal and the message TURN SIGNAL will also appear

in the DIC. To turn the chime and message off, move

the turn signal lever to the off position.

See “TURN SIGNAL” under DIC Warnings and

Messages on page 3-41 DIC Warnings and Messages

for more information.

3-8

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 429 430

Commentaires sur ces manuels

Pas de commentaire

Chevrolet 2006 Colorado Spécifications Page 138

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Chevrolet 2006 Colorado