Chevrolet 2006 Avalanche Spécifications télécharger pdf (Page 398)

100

101

8. Now connect the black negative (−) cable to the

negative (−) terminal of the good battery. Use a

remote negative (−) terminal if the vehicle has one.

Your vehicle’s remote negative (−) terminal is

marked GND.

Do not let the other end touch anything until the next

step. The other end of the negative (−) cable does

not go to the dead battery. It goes to a heavy,

unpainted metal engine part or to a remote

negative (−) terminal on the vehicle with the dead

battery.

9. Connect the other end of the negative (−) cable at

least 18 inches (45 cm) away from the dead battery,

but not near engine parts that move.

The electrical connection is just as good there, and

the chance of sparks getting back to the battery is

much less.

10. Now start the vehicle with the good battery and run

the engine for awhile.

11. Try to start the vehicle that had the dead battery. If it

will not start after a few tries, it probably needs

service.

Notice: If the jumper cables are connected or

removed in the wrong order, electrical shorting may

occur and damage the vehicle. The repairs would not

be covered by your warranty. Always connect and

remove the jumper cables in the correct order,

making sure that the cables do not touch each other

or other metal.

A. Heavy, Unpainted Metal Engine Part or Remote

Negative (−) Terminal

B. Good Battery or Remote Positive (+) and Remote

Negative (−) Terminals

C. Dead Battery or Remote Positive (+) Terminal

Jumper Cable Removal

5-48

1 2 ... 393 394 395 396 397 398 399 400 401 402 403 ... 521 522

Commentaires sur ces manuels

Pas de commentaire

Chevrolet 2006 Avalanche Spécifications Page 398

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Chevrolet 2006 Avalanche