Chevrolet 2006 Avalanche Spécifications télécharger pdf (Page 404)

100

101

A. Low-Beam Headlamp

B. High-Beam Headlamp

6. Turn the bulb connector counterclockwise and pull it

out of the assembly.

7. Unplug the electrical connector from the old bulb.

8. Plug in the electrical connector to the new bulb.

9. Place the connector with the new bulb into

the headlamp assembly and turn it clockwise until it

is tight.

10. Put the headlamp assembly back into the vehicle

and reinstall the two pins.

11. Place the inboard end of the turn signal/parking

lamp assembly into the pocket.

12. Push the outboard side of the assembly in until the

release clip snaps into place.

Vehicles without Body-Side Cladding

To replace a headlamp bulb, do the following:

1. Open the hood. See Hood Release on page 5-12

for more information.

2. Remove the pin on the headlamp assembly by

turning the pin up and pulling it straight out.

3. Pull the headlamp assembly out.

5-54

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 521 522

Commentaires sur ces manuels

Pas de commentaire

Chevrolet 2006 Avalanche Spécifications Page 404

Commentaires sur ces manuels

Produits connexes et manuels pour Siège de voiture Chevrolet 2006 Avalanche