Chevrolet ENCLAVE - NAVIGATION SYSTEM 2008 Spécifications Page 348

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 460
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 347
Taillamps, Turn Signal, Stoplamps
and Sidemarker Lamps
A. Taillamp
B. Sidemarker Lamp
To replace one of these bulbs, do the following:
1. Open the liftgate. See Liftgate on page 2-12 or
Power Liftgate on page 2-14 for more information.
2. Remove the convenience net, if the vehicle
has one.
3. Remove the three hex nuts holding the taillamp
assembly in place.
4. Pull out the taillamp assembly.
5. Turn the bulb socket counterclockwise and pull it
straight out to remove it.
6. Replace the old bulb with a new one.
7. Turn the bulb socket clockwise to reinstall.
8. Reverse these steps to reinstall the taillamp
assembly.
When reinstalling the taillamp assembly, make sure
the plastic pin on the taillamp assembly lines up
and is inserted correctly into the opening of
the vehicle.
5-48
Vue de la page 347
1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 459 460

Commentaires sur ces manuels

Pas de commentaire